Universal LED Headlight Controller - Fix Motorcycle High/Low beam wiring.
What this LED controller is for: This LED controller is designed for connecting LED headlights with Low and High beam functions to motorcycles with 2T or 4T engines.
The controller allows the low beam to stay on even if the motorcycle's power supply to it is cut when switching to high beam. It also stabilizes the voltage, which helps eliminate flickering and extends the service life of the LED lamp.
DoEnduro LED Controller is an essential adapter for installing modern dual-beam (high/low) LED headlights on motorcycles with a common but incompatible wiring setup.
The Problem: Many motorcycles (especially enduro, dirt, and classic bikes) are wired so that power to the low beam is completely cut when you switch to the high beam. A standard dual-beam LED lamp will fail in this circuit - it will simply turn off when you try to use the high beam.
Our Solution: Our LED Controller takes the signal from a single wire (your original high beam) and provides stable, regulated power to both outputs of your LED light. Your low beam stays on, and your high beam works perfectly. Problem solved!)
DoEnduro LED Controller supports the connection of two separate LED lamps. When the low beam is activated, it uses one LED lamp, and when the high beam is activated, it uses both lamps, regardless of whether voltage remains on the motorcycle's original low beam circuit.
Key Features & Benefits:
Universal Compatibility: Works with both AC (alternating current) and DC (direct current) systems (9-15V). Compatible with any motorcycle (2T or 4T), regardless of the stator type or factory wiring.
Two Configurable Modes (via Jumper):
Mode 1 (Jumper ON / Closed): Provides voltage to BOTH outputs simultaneously (Low + High). Perfect for powering two separate light pods or certain specific LED units.
Mode 2 (Jumper OFF / Open): Provides classic switching—power to only ONE output at a time (either Low or High). Works like your bike's original switch.
By default, we leave the jumper in the closed (ON) position. Please message us if you need it left in the open (OFF) position.
The kit contains LED controller connected to AC/DC rectifier. Led lamp not included.
Specifications: * Input: AC / DC 12-15V * Works with both AC and DC input power * Output: DC 12V, 60W, 5A
Ideal for: * Dual-mode or Twin headlights instalation * Hard Enduro, Endurocross, Rally, Dual-Sport motorcycles * Riders who need stable lighting even at low RPMs
Important notes: 1) This product is intended for users familiar with basic motorcycle electrical work. If you are unsure about the installation, please consult a professional mechanic. 2) When connecting the headlight to the motorcycle via the LED Controller, the Ground wire from the controller MUST NOT be wired directly to the motorcycle's chassis ground.
Please be free to text us if You have any questions.
Worldwide shipping. Delivery to USA can be with signature upon receipt (depends from state). In case of order cancellation by buyer, seller refund only for item without transportation costs.
